Mixol : Universal Stainers
Mixol multi-purpose stainer and tinting concentrate is a high quality product that has proven itself for more than 35 years. It is highly concentrated and can be added to almost any type of paint and/or coating materials.
Mixol is not a ready-made paint, but a binder-free concentrate. It can only be used when added to a ready made paint/material. Depending on the paint/material concerned, Mixol can be added up to a maximum of 10% by weight. But considering that it is highly concentrated, you can obtain best results by adding a minimum of Mixol.
Not all kinds of materials are tintable. Please first test that the materials are compatible and do not seperate. As a rule, the following materials can be tinted with Mixol: Radiator paints, epoxy resin paints, fillers and primers, polyurethane paints, synthetic resin paints, hammer-tone finishes, latex emulsion finishes, nitro-cellulose lacquers, polymer emulsion paints, chlorinated rubber paints, acrylic and alkyd resin paints, cold-water paints, cement colourings, water-based paints, acrylic latex paints, concrete floor paints, synthetic latex paints, glue-bound distempers, plasters and renderings, scumbles, stains and wood waxes, spactling pastes, pre-mixed fibrous and filler materials.
The maximum additions are: 10 % to latex and/or emulsion paints, 5–8% to paints, lacquers, varnishes, high-solids, 6% to acrylic paints, 3–5 % to transparent and/or clear lacquers, transparent paints, glazes, wood stains, waxes etc., 3% for silicate and silicone paints and/or coatings. Use only Mixol oxide tints in varnishes low in or free from aromatic compounds or in paints containing silicate or silicone resin.
|To use with||General|
There are currently no reviews for this product. Be the first to write one!
Write Your Own Review
If you have used this product and would like to share your experience with other artists, please log in to leave a review